SARAMAX Agramkow Vendita in Italia

Evacuation and charging station Material no.: 203-000030A General performance Charging channels: 1024 for manual settings Manual process: 1 channel Number of models: 1024 Charging accuracy: ±1g (50-100g), ±1% >100g Refrigerant type: R513A Gun mount: Left down (Left / Right is seen from the station) Included parts for installation: - Inlet hose of 1 mtr incl. HK3 coupling (set) - Air hose ø12 of 3 mtr incl. ½” threat (male) - Supply cable of 3 mtr. Excl. Plug AGRAMKOW PDC charging technology with DFC (Dynamic Flow Compensation) Vacuum circuit down to 0.02 mbar (abs) with active Pirani sensor Interfaces including hardware and application software for 2 potential free output (PASS and FAIL) and potential free output (start welding) and 24VDC input (Welding done) MPC2 (Multi-Purpose Controller) controller with alert diagnostic monitor of flow, pressure and evacuation sensors, refrigerant recovery, self-evacuation, 10/100Mbit Ethernet, RS485, 2*USB1.1, CAN bus, RS232, IrDA communication HMI (Human Machine Interface) TFT colour touch display for process monitoring, receipt entering, I/O image, touch control, process log, channels selection. Including light tower with signal and warning lamps along with buzzer. Language: English NOTE: If the cylinder (or connection point of the supply) has a build in check valve the supply hoses to the SARAMAX must be equipped with a 1.0 litre accumulator at min. Gun Gun (ADC type) Gun for one PDC (max 120 g/sec) with integrated start-stop switch, pressure sensor, valves, adapter heat, thermostat and hose management with quick connectors. Charging media: R513A at 120 g/sec Hose length: 8 m Coupling types: HK-2 (others on request)(Hose length, coupling type and charging speed must be specified by order) Vacuum pump L16m3/h With Leybold 2-stage 16 m³ vacuum pump Power supply: 3 x 400v ±5% + N + PE 50Hz