MRA100 Grünbeck Italy Sales
If you are looking for a reliable supplier where you can purchase the MRA100 Backwash filter, you are in the right place. PARTELLI sells in the Italy marketGrünbeck all product groups belonging to the brand, with fast delivery times and competitive prices.
Technical Specification
Standard 100μm Filter
According to DIN EN 806-2, a filter according to DIN EN 13443-1, 19628 must be installed in the drinking water system immediately after the water meter in metal pipes. A filter should also be installed in plastic pipes.
- DVGW certified -
Fully automatic backwash filter with modular filter element made of plastic, with stainless steel filter mesh, including rotating nozzle and wiper brushes for mechanical additional cleaning for optimal backwash effect, built-in drive unit. Water extraction possible even during backwashing.
Housing made of dezincification resistant brass, easy to open for maintenance checks,
including 2 pressure gauges,
backwash water connection with free discharge according to DIN EN 1717 for DN 50.
The integrated bus interface, fault detection, and a potential-free contact allow for simple remote monitoring and control, keeping you informed about the current system status of the automatic filter.
All water-contacting parts comply with the drinking water regulation.
Technical data:
Connection: 100 DN
Nominal flow: 60.0 m³/h
Initial pressure loss: 0.2 bar
Kv value: 138.0 m³/h
Pore size: 100 μm
Nominal pressure (PN): 16 bar
Operating pressure: 2-16 bar
Water temperature: 5-90 degrees C
Installation length with flange connection (excluding GSD): 250 mm
Construction height: 691 mm
Required
drain connection: 50 DN
Power connection
(Schuko plug): 230 V, 50 Hz
Protection class: 54 IP
Operating voltage: 24 V
Manufacturer: Grünbeck